5V 60Amp / 300Watt METAL BODY AC TO DC SWITCH MODE POWER SUPPLY WITH INBUILD FAN FOR LIGHT, WORD PLATE BOARD CCTV ETC.

5V 60A LED Displays METAL BODY Power Supply

Product model: A-320-5DC

output: 5VOutput

current range: 0 ~ 60A

Ripple noise Note 2 0 ~ 50 °C 100mV 120mV 150mV 280mV

Peak voltage: -25 ~ 0 °C 200mV 240mV 300mV 560mV

Output voltage adjustment range: ± 10% of rated

output voltage regulation accuracy: ± 2.0%

Power supply voltage adjustment rate: ± 15%Load regulation rate: ± 2.0%

Output start time ≤ 4S (220Vac input, full load)

Output hold time ≥16mS (220Vac input, full load)

Temperature coefficient: ± 0.03% / °C

Output: voltage overshoot <5.0%

Input voltage range: 200Vac ~ 240Vac

frequency range: 47Hz ~ 63Hz

Efficiency (typical): 220Vac 85%

Input current (maximum): 2.5A

Input: Start-up inrush current (typical value) 50A @ 220Vac power cold start

Overcurrent protection: 90% ~ 105% rated output current,

constant power Protection function: overpower protection 90% ~ 105% rated output power, constant power short-circuit protection: It can be short-circuited for a long time, and can be automatically recovered after eliminating the short-circuit

Working temperature and humidity: -25 °C ~ 50 °C; 20% ~ 90% RH non-condensing Working environment storage

temperature and humidity: -40 °C ~ 85 °C; 10% ~ 95% RH non-condensing

Safety standard: EN60950-1Di

electric strength: input-output: 3.0KVac / 10mA;Input-ground: 1.5KVac / 10mA; output-ground: 0.5KVDC / 10mA

Insulation resistance: 100M ohms leakage currentInput to ground ≤3.5mA Input to output ≤0.25mA (230Vac)Safety and Electromagnetic Compatibility Standard Electromagnetic Immunity EN61000-4-2,4,5,11; ENV50204, Class A Light Industry Standard MTBF (MIL-HDBK-217F) More than 100,000Hrs (25 °C, full load)Dimensions (L * W * H): 227X115X50mmCooling method Forced air cooling Model Voltage Ripple Accuracy Effectiveness A-320-3.3 3.3V,50A 1% 100mV 72% A-320-5 5V,60A 1% 100mV 78% A-320-7.5 7.5V,40A 1% 100mV 79% A-320-12 12V,25A 0.50% 100mV 81% A-320-13.8 13.8V,22A 0.50% 100mV 81% A-320-15 15V,20A 0.50% 100mV 82% A-320-24 24V,12.5A 0.50% 150mV 84% A-320-48 48V,6.5A 0.50% 150mV 85% Note

1. Unless otherwise specified, all specifications are rated input, rated load, and 25 ° C ambient temperature.
2. Ripple noise test method: use a 12 # twisted pair, and the terminal should be connected in parallel with 0.1uF And 10uF of capacitance, measured under the 20MHz bandwidth of the oscilloscope.
3. The power supply will be installed as a component on the final device, the final device still needs to meet the EMC condition